Head And Shoulders Clinical Strength Dandruff Defense Sensitive Scalp

Dosage for selenium sulfide varies based on the condition being treated and the concentration of the product used. It is essential to follow the specific instructions on the product label or those provided by your dermatologist.

Seborrheic Dermatitis and Dandruff

• Induction Phase: For the 2.5% prescription strength, the typical regimen is to apply the shampoo twice weekly for two weeks. This frequency is usually sufficient to bring the flaking and itching under control.
• Maintenance Phase: Once the condition is managed, the frequency is often reduced to once weekly, once every two weeks, or even once monthly, depending on the patient's response and the severity of the condition.
• Application: Approximately 1 to 2 teaspoonfuls (5 to 10 mL) of the lotion should be applied to the wet scalp.

Tinea Versicolor

• Standard Regimen: The 2.5% lotion is applied to the affected areas of the body and lathered with a small amount of water.
• Contact Time: The medication should be left on the skin for 10 minutes.
• Frequency: This is typically done once daily for seven consecutive days. Some clinicians may recommend a single application left on for 24 hours, but the 10-minute daily rinse is the standard FDA-approved approach.

Selenium sulfide is generally considered safe for use in children; however, its safety and effectiveness in infants (children under 2 years of age) have not been established through rigorous clinical trials.

• Children 2-12 years: Use should be supervised by an adult. The dosage and frequency are generally similar to adult dosing but should be confirmed by a pediatrician.
• Infants (<2 years): Use is typically avoided unless specifically directed by a specialist, as the risk of systemic absorption through thinner infant skin is higher.

Renal Impairment

Because selenium sulfide is applied topically and has minimal systemic absorption, no dosage adjustments are typically required for patients with kidney disease. However, caution should be exercised if the skin is not intact.

Hepatic Impairment

There are no specific dosage adjustments recommended for patients with liver impairment due to the lack of systemic involvement.

Elderly Patients

No specific age-related dosage adjustments are required. Clinical experience has not identified differences in responses between the elderly and younger patients; however, elderly patients may have thinner skin, necessitating careful monitoring for irritation.

Proper application technique is vital for the efficacy and safety of selenium sulfide:

1. 1Shake Well: The active ingredient can settle at the bottom of the bottle. Always shake the container vigorously before use.
2. 2Preparation: Remove all jewelry (rings, watches, necklaces) before application, as selenium sulfide can discolor certain metals, particularly silver.
3. 3Application: Wet the hair or skin thoroughly. Apply the prescribed amount and massage to create a lather.
4. 4Contact Time: For scalp conditions, leave the lather on for 2 to 3 minutes. For tinea versicolor, leave on for 10 minutes or as directed.
5. 5Rinsing: Rinse the area thoroughly. For the scalp, it is recommended to rinse for at least 5 minutes under running water to ensure all traces of the drug are removed, especially from long or thick hair.
6. 6Wash Hands: Wash your hands immediately after application to remove any residual medication.

If you miss a scheduled application, apply it as soon as you remember. However, if it is almost time for your next scheduled dose, skip the missed dose and resume your regular schedule. Do not apply extra medication to make up for a missed dose, as this may increase the risk of skin irritation.

Topical Overdose

Over-application on the skin typically results in localized irritation, redness, or a burning sensation. If this occurs, wash the area thoroughly with soap and water and discontinue use until the irritation subsides.

Accidental Ingestion

Selenium sulfide is toxic if swallowed. Symptoms of oral ingestion may include nausea, vomiting, diarrhea, and a metallic taste in the mouth. In severe cases, it can lead to central nervous system depression or garlic-like breath odor. If accidental ingestion occurs, contact a Poison Control Center (1-800-222-1222 in the US) or seek emergency medical attention immediately.

> Important: Follow your healthcare provider's dosing instructions. Do not adjust your dose or frequency without medical guidance, as overuse can lead to scalp oiliness or hair loss.

Most patients tolerate selenium sulfide well when used as directed. However, because it is a potent chemical agent, localized reactions are common.

• Skin Irritation: Many users experience mild redness, itching, or a burning sensation at the site of application. This usually occurs shortly after application and subsides after rinsing.
• Scalp Oiliness or Dryness: Selenium sulfide can alter the sebaceous gland activity in the scalp. Some patients report that their hair feels significantly oilier after use, while others experience increased dryness and brittleness.
• Hair Discoloration: This is particularly common in patients with gray, white, or chemically treated (dyed, bleached, or permed) hair. The hair may take on a yellowish or orange tint. This can often be minimized by thorough rinsing for at least 5 minutes.

• Increased Hair Loss: Some patients notice a slight increase in hair shedding (alopecia). In most cases, this is temporary and resolves once the medication is discontinued. However, it can be distressing for patients already dealing with scalp inflammation.
• Contact Dermatitis: A more pronounced allergic-type reaction characterized by swelling, crusting, or blistering of the skin. If this occurs, the medication should be stopped immediately.

• Systemic Toxicity: Only occurs if the drug is applied to large areas of broken skin or ingested. Symptoms include tremors, sweating, and abdominal pain.
• Metallic Taste: Reported by some users even with topical application, likely due to minimal absorption or inhalation of the scent during a hot shower.

While rare, serious reactions can occur. You should contact a healthcare professional immediately if you experience:

• Anaphylaxis (Severe Allergic Reaction): Symptoms include hives, difficulty breathing, swelling of the face, lips, tongue, or throat, and severe dizziness.
• Severe Skin Sloughing: If the skin begins to peel or blister extensively beyond the area of application.
• Eye Irritation/Chemical Burn: If the product accidentally enters the eyes and causes persistent redness, pain, or vision changes.

> Warning: Stop taking Selenium Sulfide and call your doctor immediately if you experience any of these serious symptoms. Prompt medical intervention is necessary to manage allergic or toxic reactions.

Selenium sulfide is generally intended for intermittent or short-term use. Prolonged, daily use over many months or years is not recommended. Long-term use may lead to:

1. 1Chronic Scalp Irritation: The skin may become hypersensitized to the ingredient, leading to a cycle of inflammation.
2. 2Hair Texture Changes: Persistent use can lead to chronically dry, straw-like hair texture that is prone to breakage.
3. 3Accumulation Concerns: While systemic absorption is low, the long-term effects of repeated low-level exposure on systemic selenium levels have not been extensively studied in humans.

No FDA black box warnings have been issued for selenium sulfide. It is considered a safe medication when used topically according to standard dermatological guidelines. However, its potential for toxicity upon ingestion remains a primary safety concern for households with children.

Report any unusual symptoms or persistent irritation to your healthcare provider. They may recommend a lower concentration or an alternative antifungal agent like ketoconazole or zinc pyrithione.

Selenium sulfide is for external use only. It must never be ingested or applied to internal body surfaces (mucous membranes). Patients should be cautioned that this medication is a potent chemical and should be handled with care. It is essential to keep the product out of reach of children and pets, as accidental ingestion can be fatal.

There are currently no FDA black box warnings for Selenium Sulfide. It has a long-established safety profile for topical use dating back to its initial approval in 1951.

Allergic Reactions and Anaphylaxis

Patients with a known hypersensitivity to selenium or sulfur should avoid this medication. While rare, systemic allergic reactions can occur. If you have a history of severe allergies to other topical products, a 'patch test' (applying a small amount to a tiny area of skin) may be advisable before full application.

Skin Integrity

Do not apply selenium sulfide to skin that is acutely inflamed, oozing, or broken. This includes skin with open cuts, severe scratches, or areas affected by acute eczema flares. Applying the medication to compromised skin significantly increases the risk of systemic absorption and potential selenium toxicity.

Ocular and Mucous Membrane Exposure

Avoid contact with the eyes, inside of the nose, mouth, and genital area. If the product comes into contact with the eyes, rinse immediately with large amounts of cool water for at least 15 minutes. Persistent irritation requires an evaluation by an ophthalmologist.

Chemical Treatments and Jewelry

Selenium sulfide can react with the chemicals used in hair perms and dyes. It is generally recommended to wait at least 48 hours after a chemical hair treatment before using selenium sulfide. Additionally, the product can tarnish silver and other metal jewelry; remove all such items before use.

For most patients, routine laboratory monitoring (such as blood counts or liver function tests) is not necessary because systemic absorption is so low. However, healthcare providers will monitor:

• Clinical Response: Evaluation of the skin or scalp to ensure the infection or inflammation is resolving.
• Skin Sensitivity: Regular checks for signs of contact dermatitis or excessive irritation.

Selenium sulfide does not affect the central nervous system when used topically. There are no restrictions on driving or operating heavy machinery associated with the use of this medication.

There are no known direct interactions between topical selenium sulfide and alcohol consumption. However, alcohol can sometimes exacerbate inflammatory skin conditions like seborrheic dermatitis in certain individuals.

There is no 'withdrawal syndrome' associated with stopping selenium sulfide. However, seborrheic dermatitis is often a chronic condition. If the medication is stopped abruptly without a maintenance plan, the flaking and itching are likely to return within a few weeks. Tapering the frequency (e.g., from twice weekly to once weekly) is the standard approach to finding the minimum effective maintenance dose.

> Important: Discuss all your medical conditions, especially any history of skin sensitivity or chemical allergies, with your healthcare provider before starting Selenium Sulfide.

There are no documented systemic drug-drug interactions that are strictly contraindicated with topical selenium sulfide. This is primarily due to the drug's lack of significant absorption into the bloodstream. However, from a topical perspective, it should not be used simultaneously on the same area of skin with other potent irritants or specific chemicals that may react with selenium.

Other Medicated Shampoos

Using selenium sulfide in conjunction with other medicated shampoos (such as those containing coal tar, salicylic acid, or ketoconazole) may increase the risk of severe scalp irritation and dryness. If multiple medicated products are prescribed, they should typically be used on alternating days rather than at the same time.

Topical Corticosteroids

While often used together to manage inflammation, applying a high-potency topical steroid immediately after a selenium sulfide wash may alter the absorption characteristics of the steroid. Healthcare providers usually recommend a specific sequence or time delay between these applications.

Hair Dyes and Perming Solutions

Selenium sulfide can interact with the metallic salts sometimes found in hair dyes or the reducing agents in perming solutions. This can lead to unpredictable hair color changes or damage to the hair shaft. Patients are advised to rinse the hair thoroughly and wait at least two days between using selenium sulfide and applying chemical hair treatments.

There are no known interactions between topical selenium sulfide and specific foods, including grapefruit, dairy, or high-fat meals. Because the drug does not enter the digestive system or undergo hepatic metabolism, dietary factors do not influence its efficacy or safety.

There are no documented interactions with common herbal supplements like St. John's Wort or Ginkgo Biloba. However, patients taking high-dose oral selenium supplements should inform their doctor. While topical absorption is low, the cumulative effect of high oral intake and potential topical absorption (if skin is broken) should be considered by the prescribing physician.

Selenium sulfide is not known to interfere with common blood or urine laboratory tests. It does not affect glucose monitoring, coagulation studies, or standard metabolic panels. However, if a patient is undergoing a skin biopsy in the area of use, they should inform the pathologist, as residual selenium might theoretically be detectable on the tissue surface.

Summary of Interaction Management

• Mechanism: Primarily physical/chemical interactions on the skin surface or additive irritant effects.
• Clinical Consequence: Increased localized toxicity (irritation) or aesthetic issues (hair discoloration).
• Management Strategy: Ensure thorough rinsing, space out the use of different topical products, and remove jewelry before application.

> Important: Tell your doctor about ALL medications, supplements, and herbal products you are taking, even if they are only applied to the skin. A complete medication record helps prevent unnecessary irritation and ensures optimal treatment results.

Absolute contraindications are conditions under which selenium sulfide must never be used due to the high risk of adverse effects or toxicity.

1. 1Hypersensitivity to Selenium Sulfide: Any patient with a documented history of allergic reaction (rash, hives, anaphylaxis) to selenium sulfide or any component of the formulation (such as detergents or fragrances in the shampoo) must not use the product.
2. 2Broken or Severely Inflamed Skin: The medication is absolutely contraindicated for use on skin that is blistered, raw, oozing, or has open wounds. The inorganic selenium salt can be absorbed through compromised skin barriers, leading to systemic selenium poisoning. Symptoms of such poisoning include vomiting, tremors, and metallic taste.
3. 3Application to Mucous Membranes: It must not be applied to the eyes, mouth, or vaginal area, as it is a severe irritant to these delicate tissues.

Relative contraindications require a careful risk-benefit analysis by a healthcare professional before proceeding with treatment.

• Pregnancy and Lactation: Due to a lack of controlled human data, use during pregnancy is generally reserved for cases where the benefit to the mother clearly outweighs the potential risk to the fetus.
• Children under 2 years of age: The increased surface-area-to-body-mass ratio in infants and their thinner skin barrier increase the risk of systemic absorption.
• Chemically Treated Hair: Patients with recently dyed or permed hair may experience significant discoloration or hair damage. Use should be delayed until the hair has stabilized (usually 48-72 hours).

There is a potential for cross-sensitivity in patients who are allergic to sulfur-containing compounds. While selenium sulfide is a distinct chemical entity, some patients with 'sulfur allergies' (which are often actually allergies to sulfonamide antibiotics, a different class) may still experience irritation from inorganic sulfides. A cautious approach is recommended for these individuals.

> Important: Your healthcare provider will evaluate your complete medical history, including any previous skin reactions to shampoos or soaps, before prescribing Selenium Sulfide. Always disclose if you have a history of sensitive skin or eczema.

FDA Pregnancy Category C

Selenium sulfide has been assigned to Pregnancy Category C. This means that animal reproduction studies have not been conducted, and there are no adequate and well-controlled studies in pregnant women. It is not known whether selenium sulfide can cause fetal harm when applied topically to a pregnant woman or if it can affect reproduction capacity.

Trimester-Specific Risks:

• First Trimester: As with most medications, extreme caution is advised during the period of organogenesis (organ formation).
• Second and Third Trimesters: The risk of systemic absorption remains low on intact skin, but the medication should only be used if the healthcare provider deems it essential.

It is not known whether selenium sulfide is excreted in human milk. However, because systemic absorption through intact skin is minimal, the amount expected to be present in breast milk is likely negligible.

Precautions:

• Ensure the infant's skin does not come into direct contact with treated areas of the mother's skin (e.g., if used for tinea versicolor on the chest).
• Wash hands thoroughly after application before handling the infant.
• Consult a lactation consultant or pediatrician before use.

Selenium sulfide is frequently used in children for the treatment of dandruff and tinea versicolor. However, the FDA notes that safety and effectiveness in infants have not been established.

• Growth Effects: There is no evidence that topical selenium sulfide affects growth or development in children.
• Dosing: Children should use the smallest amount necessary to cover the affected area and must be supervised to prevent accidental ingestion or eye contact.

Clinical studies of selenium sulfide did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects.

• Skin Fragility: Elderly patients may have thinner, more fragile skin (atrophy), which may increase the risk of irritation or, theoretically, absorption.
• Polypharmacy: While systemic interactions are unlikely, the elderly are more likely to use multiple topical products for various skin conditions, increasing the risk of localized skin reactions.

For patients with impaired kidney function, topical application on intact skin is generally considered safe. However, if the skin barrier is compromised, the small amount of absorbed selenium would rely on renal excretion. In patients with end-stage renal disease (ESRD), caution is paramount to avoid any potential for systemic accumulation.

There are no specific guidelines for the use of selenium sulfide in patients with liver disease (Child-Pugh classes A, B, or C). Since the drug does not undergo significant hepatic metabolism, liver impairment does not typically alter the drug's safety profile when used as directed.

> Important: Special populations require individualized medical assessment. Pregnant or nursing women should always consult their obstetrician or pediatrician before starting any new medication, including topical shampoos.

Selenium sulfide is a cytostatic agent that reduces the rate of epidermal cell proliferation. The primary molecular mechanism involves the interference with hydrogen bond formation in the DNA of epithelial cells, which effectively slows down the mitotic (cell division) rate. In patients with seborrheic dermatitis, the cell turnover rate is significantly higher than in healthy skin; selenium sulfide returns this rate toward normal levels.

Additionally, it exhibits localized antifungal activity. It is particularly effective against Malassezia furfur, a lipophilic yeast. By disrupting the cell membrane integrity or interfering with the metabolic enzymes of the yeast, it reduces the fungal colonization that drives the inflammatory response in dandruff and tinea versicolor.

• Dose-Response: Higher concentrations (2.5%) generally provide a more rapid reduction in fungal load and flaking than lower concentrations (1%).
• Time to Onset: Improvement in itching and flaking is typically seen within 1 to 2 weeks of starting the twice-weekly regimen.
• Duration of Effect: The effects are temporary. Because it does not 'cure' the underlying tendency toward seborrheic dermatitis, symptoms usually recur if maintenance applications are discontinued.

| Parameter | Value |

|---|---|

| Bioavailability | < 1% (on intact skin) |

| Protein Binding | N/A (minimal systemic presence) |

| Half-life | N/A (topical action) |

| Tmax | N/A |

| Metabolism | Not significantly metabolized |

| Excretion | Renal (trace amounts if absorbed) |

• Molecular Formula: SeS2
• Molecular Weight: 143.09 g/mol
• Solubility: Practically insoluble in water and organic solvents.
• Description: A bright orange to reddish-brown powder with a faint odor of hydrogen sulfide. In commercial products, it is prepared as a stabilized suspension.

Selenium sulfide is classified as an antiseborrheic and a topical antifungal. It is often grouped with other scalp treatments such as ketoconazole (an imidazole antifungal), zinc pyrithione (an antifungal/antiseptic), and coal tar (a keratoplastic). Unlike coal tar, which works primarily by slowing skin cell growth, selenium sulfide provides the dual benefit of cytostatic and antifungal activity.